1928-29 Rear Wheel Studs

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Jared275
Posts: 306
Joined: May 29th, 2009, 8:37 pm
Body Type: dUMP
Model Year: 1928

1928-29 Rear Wheel Studs

Post by Jared275 »

Does anyone know if there is a source for 1928-29 rear wheel studs (worm drive)? I need some at least one on the drivers and passanger side. Looking through Macs and Snyders I see that they are not offered. If they are not available, does anyone have any suggestions other than purchasing the Hub/drum/stud assembly complete.
Regards,
Jared
User avatar
gunmetal
Posts: 304
Joined: August 21st, 2010, 7:28 am
Body Type: 188-A
Model Year: 1929
Location: Milford, Indiana

Re: 1928-29 Rear Wheel Studs

Post by gunmetal »

does your rims have the scalups on them( AA-1116-BR ). I have never found any unless you get another drum for the studs or replace yours.
1oldman57
Posts: 80
Joined: December 16th, 2009, 4:57 am
Body Type: 82-A
Model Year: 1929
Location: Mount Pleasant, MI 48858

Re: 1928-29 Rear Wheel Studs

Post by 1oldman57 »

A few years ago I bought some from Neil Wilson. You have to press them into the brake drum.

Tim
User avatar
tiredtruckrestorer
Posts: 338
Joined: April 20th, 2003, 7:09 pm
Model Year: 1931
Location: Orwigsburg, PA

Re: 1928-29 Rear Wheel Studs

Post by tiredtruckrestorer »

Jared, I probably have some. How many do you need, and are they right and/or left hand thread? Tim is right, after the stud is installed in the hub/drum assembly, it gets put in a press and swedged in just like the ones on the Model A's. I had to make a special tool to fit the AA studs though.

Keith
Post Reply