Page 1 of 1
1928-29 Rear Wheel Studs
Posted: September 19th, 2012, 6:44 am
by Jared275
Does anyone know if there is a source for 1928-29 rear wheel studs (worm drive)? I need some at least one on the drivers and passanger side. Looking through Macs and Snyders I see that they are not offered. If they are not available, does anyone have any suggestions other than purchasing the Hub/drum/stud assembly complete.
Regards,
Jared
Re: 1928-29 Rear Wheel Studs
Posted: September 19th, 2012, 1:03 pm
by gunmetal
does your rims have the scalups on them( AA-1116-BR ). I have never found any unless you get another drum for the studs or replace yours.
Re: 1928-29 Rear Wheel Studs
Posted: September 19th, 2012, 4:04 pm
by 1oldman57
A few years ago I bought some from Neil Wilson. You have to press them into the brake drum.
Tim
Re: 1928-29 Rear Wheel Studs
Posted: September 19th, 2012, 7:30 pm
by tiredtruckrestorer
Jared, I probably have some. How many do you need, and are they right and/or left hand thread? Tim is right, after the stud is installed in the hub/drum assembly, it gets put in a press and swedged in just like the ones on the Model A's. I had to make a special tool to fit the AA studs though.
Keith