Cab Rear panel dimension for 29 AA

[JPP]

Hi, I was thinking of fabricating my own rear panels for my 29 cab as I assume that they are simple rectangles. I known that they may not be perfect, but I am making a driver and not a show truck. I also want the rear window to slide open, as I finish this cab I realize how little room there is.. So if someone could grab those dimensions I would be great full. Thanks

[JPP]

no one has a tape measure?

[rollingsculpture]

well i have a 31 not 29 but would imagine they are close . from side to side inside top door post to door post =51 inch and from front to back that is to say dash panel ( not instrument gauge ) to rear shell metal 33 inchs


anyone else with a 29?

[Brian T]

Hello John,
Are you just needing the dimensions for the 2 center panels? If you can wait a couple of days I can measure mine.

[JPP]

yes the two rear center panels and where is the window from the top. I know the window is 12" wide by 6" high.

[Brian T]

Hi, I was thinking of fabricating my own rear panels for my 29 cab as I assume that they are simple rectangles. I known that they may not be perfect, but I am making a driver and not a show truck. I also want the rear window to slide open, as I finish this cab I realize how little room there is.. So if someone could grab those dimensions I would be great full. Thanks

John,
Here are the dimensions you asked for, I did not mention the flanges where they join together at all sides in the drawing, they would be 1/2, I have a few picks if you need them.

[JPP]

Brian, That is exactly what I needed Thanks.