Fitting Model AA Door
-
- Posts: 1
- Joined: October 8th, 2012, 9:53 pm
- Body Type: 82A
- Model Year: 1929
Fitting Model AA Door
I have a 1929 Model AA Truck I am restoring. I need information on adjusting the door fit if any one has some advice for me
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Fitting Model AA Door
I have a MSWord document with some 82-A cab alignment information. I you send me an email, I will send it to you.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- rollingsculpture
- Posts: 553
- Joined: December 9th, 2008, 7:30 am
- Body Type: platform
- Model Year: 1931
- Location: Takoma Park maryland
Re: Fitting Model AA Door
neil do you have a doc like that for the 82 b ? sounds like it would have interesting info to know
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Fitting Model AA Door
I wrote the document for the 82-A cab. But the procedure can be applied to the 82-B cab or applied to any A/AA.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Fitting Model AA Door
Hi I dropped you an email about this also.
thanks in advance.
thanks in advance.
-
- Posts: 161
- Joined: July 8th, 2011, 4:36 am
- Body Type: 82-A
- Model Year: 1929
- Location: Townsend,MA
Re: Fitting Model AA Door
Neil, I set my doors and I think I did it right, could you send me the document as well, as a reference. Thanks
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Fitting Model AA Door
If the belt moulding of the door and quarter panel align (exactly) and the opening is covered by the lips on the door, then you must have it correct.
If you want the document, you must sent me an email. I can't send you an email from the AA Forum and include an attachment.
If you want the document, you must sent me an email. I can't send you an email from the AA Forum and include an attachment.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Fitting Model AA Door
got the writeup, thanks a ton! Now I understand why my hood doesn't align as well as my doors.
Would it be better to take this shimming project to a pro? or attack it in the garage?
Would it be better to take this shimming project to a pro? or attack it in the garage?
Re: Fitting Model AA Door
I need to do the same thing! Will send you a email
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Fitting Model AA Door
carnut14,
I don't have the $'s to hire a shop to do this. It takes lots of time and it is fairly simple to do. So, my advice is do it yourself.
I don't have the $'s to hire a shop to do this. It takes lots of time and it is fairly simple to do. So, my advice is do it yourself.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/