Page 1 of 1
door striker plate shild
Posted: February 3rd, 2013, 3:28 pm
by macswoods
I am rebuilding the door latches in my 29 AA. Can any one post a photo of how/where the door striker plate shield is mounted on the door post, part # is A65029S ( out of Macs catalog) Thanks Mac....
Re: door striker plate shild
Posted: February 3rd, 2013, 5:02 pm
by Neil Wilson
FYI - Vendor catalogs are mostly not in part number sequence. It would be better to post the catalog year and page (followed by their part #). And vendor part numbers normally have no relationship to original Ford parts numbers.
Re: door striker plate shild
Posted: February 3rd, 2013, 5:42 pm
by Bob C
Re: door striker plate shild
Posted: February 3rd, 2013, 9:20 pm
by macswoods
thanks you all, that is the part.Also thank you Neil for the photo. Mac.....
Re: door striker plate shild
Posted: March 16th, 2013, 5:48 pm
by carnut14
now i'm confused. (ok not a dificult thing to do)
I have the vintique door striker plate for the 28/29 pickup part no a-80331 which looks like the closeup of the older door frame a few post able, which leads to two questions:
A) how is this part mounted to the wood, a pair of wood scres?
b) what is the flat plate shown above? where does it fit?