Front brake part

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
User avatar
macswoods
Posts: 313
Joined: May 4th, 2009, 1:20 pm
Body Type: 82-A
Model Year: 1929
Location: Wilhoit, Arizona

Front brake part

Post by macswoods »

I am finally putting the front end in the truck. It is a October 29 with the car type front brakes. While going thru the bag of parts, I don't remember where this part goes. Help! Mac.. :?: Sorry for the LARGE PHOTO ?
Attachments
100_6316.JPG
100_6316.JPG (505 KiB) Viewed 4394 times
100_6315.JPG
100_6315.JPG (505.22 KiB) Viewed 4394 times
User avatar
gunmetal 2
Posts: 222
Joined: April 1st, 2013, 12:51 pm
Body Type: 82-A
Model Year: 1929

Re: Front brake part

Post by gunmetal 2 »

Mac My truck was made 8-30-29 and it has the heavier brakes and there is nothing that looks like that. Sorry
SHELBY MESSER
Posts: 752
Joined: March 9th, 2009, 8:06 pm
Body Type: 75-A
Model Year: 1930
Location: Sacramento, Ca.

Re: Front brake part

Post by SHELBY MESSER »

Mac, That is a grease slinger that goes in after you have put in your grease packed bearing on the inner bearing in the hub :!: Shelby, Louisiana.
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Front brake part

Post by Neil Wilson »

Does that part fit the outside opening of the hub? If it does, then it would be tapped onto the hub after the outer wheel bearing is inserted. I think I have seen this before. Anyone else?
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Bob C
Posts: 1442
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Re: Front brake part

Post by Bob C »

Like Neil said, could be the front wheel outer bearing grease retainer AA-1197-R

Bob
User avatar
macswoods
Posts: 313
Joined: May 4th, 2009, 1:20 pm
Body Type: 82-A
Model Year: 1929
Location: Wilhoit, Arizona

Re: Front brake part

Post by macswoods »

like this ? Mac.............. :lol:
Attachments
100_6317 (400x300).jpg
100_6317 (400x300).jpg (165.4 KiB) Viewed 4328 times
User avatar
gunmetal 2
Posts: 222
Joined: April 1st, 2013, 12:51 pm
Body Type: 82-A
Model Year: 1929

Re: Front brake part

Post by gunmetal 2 »

Does anybody have any of them, mine was not done that way.
Reds34
Posts: 603
Joined: May 15th, 2010, 2:34 pm
Body Type: dump
Model Year: 1930
Location: Eastern, CT

Re: Front brake part

Post by Reds34 »

I think it goes on the spindle before your inner bearing. Brattons calls it the front hub inner dust seal. Just a guess

http://brattons.com/uploads/images_prod ... /01610.jpg

Red
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Front brake part

Post by Neil Wilson »

Reds34,
The part you reference is not the same part which macswoods showed. The part you reference is pressed onto the spindle.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
User avatar
macswoods
Posts: 313
Joined: May 4th, 2009, 1:20 pm
Body Type: 82-A
Model Year: 1929
Location: Wilhoit, Arizona

Re: Front brake part

Post by macswoods »

Thanks Neil. I had pictures of the Tear down of the truck years ago but the hard drive
crashed and then I got CRS. You are a wealth of AA information. Mac... :D
Post Reply