Warford Bearings

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Watermelon Truck2
Posts: 48
Joined: January 4th, 2007, 5:07 pm
Model Year: 1930
Location: pennsylvania

Warford Bearings

Post by Watermelon Truck2 » January 25th, 2007, 3:40 pm

Do any of you guys have some bearing numbers for a warford. here are the warford part # WA -1252 countershaft bearing 2 req
Wa-1251 spigot bearing 1 req
Wa-1250 main drive gear bearing 1 req
Wa-1339 ball bearing rear 1 req
Wa-1342 ball bearing front 1 req

bud valerius
Posts: 321
Joined: May 14th, 2004, 5:24 am
Model Year: 1930
Location: Manhattan , Kansas

Post by bud valerius » January 26th, 2007, 4:44 am

All the bearings for the Warford are still avaible ,you should be able to cross reference the numbers that are on them with the parts houses .Its been about 15 years since I rebuilt two Warfords there were some that I had to get a bearing book that had all the inside & outside measurements to find the correct bearings . I also found that the bearing manufactures will tell you that they dont make some bearing numbers anymore but whin you recieve the researched bearings with there new computer numbers on the box and look at the bearing it will have the original number that you were looking for stamped in it . Good luck ,I wish I had recorded all my findings 15 years ago . In the future I will pass on all the information that I come up with to the club to be recorded for other members to be able to use . Bud Valerius

User avatar
Neil Wilson
Posts: 2610
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Post by Neil Wilson » January 26th, 2007, 8:46 am

It would be great to have the final information on these bearings once they are determined. Please post what you find.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
www.aafords.com - AA information and photographs

Watermelon Truck2
Posts: 48
Joined: January 4th, 2007, 5:07 pm
Model Year: 1930
Location: pennsylvania

Post by Watermelon Truck2 » January 26th, 2007, 3:42 pm

I don't have all the bearings that is my problem and those warford # are just that . if someone could dig up some # I would really appreciate it.

bud valerius
Posts: 321
Joined: May 14th, 2004, 5:24 am
Model Year: 1930
Location: Manhattan , Kansas

Warford bearings

Post by bud valerius » January 27th, 2007, 11:48 am

I found the bearing book that I used for the bearings ( Rollway bearing service catalog )
Attachments
Bearing Info - Bud 2a[1].JPG
Bearing Info - Bud 2a[1].JPG (99.64 KiB) Viewed 2064 times
Bearing Info - Bud 1a[1].JPG
Bearing Info - Bud 1a[1].JPG (93.62 KiB) Viewed 2065 times

bud valerius
Posts: 321
Joined: May 14th, 2004, 5:24 am
Model Year: 1930
Location: Manhattan , Kansas

More pages from bearing catalog

Post by bud valerius » January 27th, 2007, 11:56 am

The first two underlined I think are the ones that I used & the one on the second page that is underlined is one that I think I used . Sorry I will have to get the second page adjusted as it is to big to post. If any one that is interested I could fax them to you Bud

Bob C
Posts: 1196
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Post by Bob C » January 27th, 2007, 8:07 pm

Mark,
Here is some bearing numbers for you.
WA 1339 is SKF 307 ID 35mm, OD 80mm, W 21mm
WA 1342 is Fafiner 210K ID 50mm, OD 90mm, W 20mm
WA 1250 is Hyatt WRA 206 ring number on bearing is 7392
ID 1.500, OD 2.125, W 1.078
I don't see it in the Canadian parts book but the outer race for WA 1250
on my Warford is Hyatt OC 305 which should be the same as Ford BB4628
ID 2.125, OD 2.4409, W 1.125.

Watermelon Truck2
Posts: 48
Joined: January 4th, 2007, 5:07 pm
Model Year: 1930
Location: pennsylvania

Post by Watermelon Truck2 » January 28th, 2007, 6:07 am

thank you for this info , I well keep these # and hope everyone else does to .That way they well be around for future reference.

Watermelon Truck
Posts: 14
Joined: November 13th, 2007, 5:49 pm
Model Year: 1930

Re: Warford Bearings

Post by Watermelon Truck » November 26th, 2007, 2:01 pm

Over the thanksgiving holiday, I went to see my aunt and uncle in Michigan.My aunt works for a place that builds gear boxes. They still use the model A and AA trans designs to build gear boxes for machinery .I saw all the gears for these trans on a shelf , the cases are changed a little bit for mounting in a machine.I am going to try and get them to help me put my warford back together .If they can help me I well use this info to try and create a manual of part numbers for bearings and gears.

Post Reply