High Speed Rear?
- wv model AA
- Posts: 71
- Joined: April 16th, 2013, 9:24 am
- Body Type: Dump truck
- Model Year: 1931
- Location: Shepherdstown, WV
Re: High Speed Rear?
I wasn't referring to a worm drive but the trucks from 1930-31.
West Virginia Model AA
"Hold My Beer and Watch This..."
"Hold My Beer and Watch This..."
-
- Posts: 753
- Joined: August 11th, 2013, 4:25 pm
- Body Type: 82-A Platform
- Model Year: 1928
- Location: Hamilton, Mich.
Re: High Speed Rear?
AAholic wrote:I assume you are referring to the worm drive rear end, my bevel gear housing is stamped 7-36 on the lower edge where the two halves are joined in the middle as well as having a tag with the same numbers which are the number of teeth on the pinion and ring gear if I am not mistaken.
I recently looked at another rear end that had no tag nor any apparent stamped numbers, the speedo gear was stamped 6.6
Oh! You have one of the "new" trucks. Mine is the old one.
KVO
KVO
Dec. '28 AA
Dec. '28 AA