High Speed Rear?

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
User avatar
wv model AA
Posts: 71
Joined: April 16th, 2013, 9:24 am
Body Type: Dump truck
Model Year: 1931
Location: Shepherdstown, WV

Re: High Speed Rear?

Post by wv model AA »

I wasn't referring to a worm drive but the trucks from 1930-31.
West Virginia Model AA

"Hold My Beer and Watch This..."
KimVanOrder
Posts: 753
Joined: August 11th, 2013, 4:25 pm
Body Type: 82-A Platform
Model Year: 1928
Location: Hamilton, Mich.

Re: High Speed Rear?

Post by KimVanOrder »

AAholic wrote:I assume you are referring to the worm drive rear end, my bevel gear housing is stamped 7-36 on the lower edge where the two halves are joined in the middle as well as having a tag with the same numbers which are the number of teeth on the pinion and ring gear if I am not mistaken.
I recently looked at another rear end that had no tag nor any apparent stamped numbers, the speedo gear was stamped 6.6

Oh! You have one of the "new" trucks. Mine is the old one. :wink:

KVO
KVO
Dec. '28 AA
Post Reply