Rear fenders on Stake bed
-
- Posts: 753
- Joined: August 11th, 2013, 4:25 pm
- Body Type: 82-A Platform
- Model Year: 1928
- Location: Hamilton, Mich.
Rear fenders on Stake bed
So: I have a 28 steak bed, Is it supposed to have rear fenders? Or was that an option?
KVO
Dec. '28 AA
Dec. '28 AA
- gunmetal 2
- Posts: 222
- Joined: April 1st, 2013, 12:51 pm
- Body Type: 82-A
- Model Year: 1929
Re: Rear fenders on Stake bed
If you have the short running boards then no rear fenders. If you don't know it will be where your running board brackets brackets are located at. My 29 has one by the front fender and right by the back of the cab.
-
- Posts: 161
- Joined: July 8th, 2011, 4:36 am
- Body Type: 82-A
- Model Year: 1929
- Location: Townsend,MA
Re: Rear fenders on Stake bed
So does mine
-
- Posts: 753
- Joined: August 11th, 2013, 4:25 pm
- Body Type: 82-A Platform
- Model Year: 1928
- Location: Hamilton, Mich.
Re: Rear fenders on Stake bed
Thanks Guys! I have the short running boards just like the ones in your picture. I just wanted to know if no rear fenders was original or not. Sounds like I'm good. Thanks again..
KVO
KVO
KVO
Dec. '28 AA
Dec. '28 AA
Re: Rear fenders on Stake bed
You're lucky to not have the fenders, your odds of a UFO encounter are higher than a 28/29 AA rear fender encounter.
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: Rear fenders on Stake bed
Are the rear fenders from stake bed (29) the same as the express bed fenders?
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Rear fenders on Stake bed
AA-16438 RH and AA-16439 LH Design 2 rear fenders were used starting in early 1928 (probably March or April) through June 1930 for the following body types:
The attached photo gives a front and rear view of the Design 2 left hand fender.
Prior to the Design 2 rear fenders, there were Design 1 rear fenders used for the 89-A with long center pockets. And there were AA-16428 RH and AA-16429 LH rear fender for the 88-A.85-A Panel Delivery
88-A Platform (optional equipment through July 1929)
89-A Express
The attached photo gives a front and rear view of the Design 2 left hand fender.
- Attachments
-
- AA-16439 front-rear.jpg (416.24 KiB) Viewed 4506 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
Re: Rear fenders on Stake bed
Excellent. These are the same fenders my freind has.