Rear fenders on Stake bed

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
KimVanOrder
Posts: 753
Joined: August 11th, 2013, 4:25 pm
Body Type: 82-A Platform
Model Year: 1928
Location: Hamilton, Mich.

Rear fenders on Stake bed

Post by KimVanOrder »

So: I have a 28 steak bed, Is it supposed to have rear fenders? Or was that an option?
KVO
Dec. '28 AA
User avatar
gunmetal 2
Posts: 222
Joined: April 1st, 2013, 12:51 pm
Body Type: 82-A
Model Year: 1929

Re: Rear fenders on Stake bed

Post by gunmetal 2 »

If you have the short running boards then no rear fenders. If you don't know it will be where your running board brackets brackets are located at. My 29 has one by the front fender and right by the back of the cab.
JPP
Posts: 161
Joined: July 8th, 2011, 4:36 am
Body Type: 82-A
Model Year: 1929
Location: Townsend,MA

Re: Rear fenders on Stake bed

Post by JPP »

So does mine
AA.jpg
AA.jpg (75.15 KiB) Viewed 4740 times
KimVanOrder
Posts: 753
Joined: August 11th, 2013, 4:25 pm
Body Type: 82-A Platform
Model Year: 1928
Location: Hamilton, Mich.

Re: Rear fenders on Stake bed

Post by KimVanOrder »

Thanks Guys! I have the short running boards just like the ones in your picture. I just wanted to know if no rear fenders was original or not. Sounds like I'm good. Thanks again..

KVO
KVO
Dec. '28 AA
User avatar
fdohnke
Posts: 77
Joined: February 23rd, 2012, 10:34 pm
Body Type: 82A
Model Year: 1929
Contact:

Re: Rear fenders on Stake bed

Post by fdohnke »

You're lucky to not have the fenders, your odds of a UFO encounter are higher than a 28/29 AA rear fender encounter.
User avatar
s147881
Posts: 425
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

Re: Rear fenders on Stake bed

Post by s147881 »

Are the rear fenders from stake bed (29) the same as the express bed fenders?
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Rear fenders on Stake bed

Post by Neil Wilson »

AA-16438 RH and AA-16439 LH Design 2 rear fenders were used starting in early 1928 (probably March or April) through June 1930 for the following body types:
85-A Panel Delivery
88-A Platform (optional equipment through July 1929)
89-A Express
Prior to the Design 2 rear fenders, there were Design 1 rear fenders used for the 89-A with long center pockets. And there were AA-16428 RH and AA-16429 LH rear fender for the 88-A.

The attached photo gives a front and rear view of the Design 2 left hand fender.
Attachments
AA-16439 front-rear.jpg
AA-16439 front-rear.jpg (416.24 KiB) Viewed 4452 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
User avatar
s147881
Posts: 425
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

Re: Rear fenders on Stake bed

Post by s147881 »

Excellent. These are the same fenders my freind has.
Post Reply