Does anyone know of a place to get the latches and hinges for the end gate.
Thanks
Latch for end gate on a stake bed.
- AAholic
- Posts: 281
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
Re: Latch for end gate on a stake bed.
- Attachments
-
- 608_st.jpg (6.59 KiB) Viewed 4495 times
-
- Posts: 22
- Joined: January 8th, 2013, 3:56 am
- Body Type: 82B
- Model Year: 1931
- Location: NW Ohio
Re: Latch for end gate on a stake bed.
Yes that looks like what I want. Thanks
-
- Posts: 12
- Joined: March 28th, 2011, 3:59 pm
- Body Type: BB-189
- Model Year: 1932
- Location: Tenants Harbor Maine
Re: Latch for end gate on a stake bed.
Half Ton Fun in NJ - Bob Selzam has some NOS rack corner brackets.
I am in the process of working with a local company to cut out gate hinge blanks which need a little forming and welding. Hopefully soon I will have a hinge prototype to share with everyone.
Scott
I am in the process of working with a local company to cut out gate hinge blanks which need a little forming and welding. Hopefully soon I will have a hinge prototype to share with everyone.
Scott
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Latch for end gate on a stake bed.
FYI - The parts shown in the center are stake rack connectors. These are not latches or hinges. For original rack, the rear stake racks would have flat connectors between the two racks which allow the left rack to be removed first. The corner connectors would be left and right handed. The rear racks should be removable before removing the side-rear rack.AAholic wrote:Is this what you're looking for?
http://www.easternmarine.com/Stake-Pock ... ody-Parts/
Many places sell these connectors (like a local hardware store in my town). They are not exactly the same as original (but very close).
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- macswoods
- Posts: 313
- Joined: May 4th, 2009, 1:20 pm
- Body Type: 82-A
- Model Year: 1929
- Location: Wilhoit, Arizona
Re: Latch for end gate on a stake bed.
I got all my stake rack parts from RedTrailers.com Good price and nice product.215-538-1155
in Quakertown , PA
in Quakertown , PA