SPEEDO CABLE FRAME BRACKET

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
rfj52
Posts: 81
Joined: November 21st, 2009, 2:57 am
Model Year: 1930

SPEEDO CABLE FRAME BRACKET

Post by rfj52 »

Hi I have a 1930-31, 131" wheel base AA and I just purchased a speedo bracket from Synders . But I am not sure of its location on frame?
Hayslip
Posts: 235
Joined: February 26th, 2007, 6:20 am
Model Year: 1930

Re: SPEEDO CABLE FRAME BRACKET

Post by Hayslip »

Passenger side top of frame opposite transmission next to the body bracket is a hole. I think that is the correct hole.
Hayslip
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: SPEEDO CABLE FRAME BRACKET

Post by Neil Wilson »

rfj52,
Your AA would not have used a bracket.

The #2 frame cross member was changed from a channel style (similar to the A counter part) to a flanged, flat design in early 1929 (see attached drawing). This new design included a grommet hole for routing the speedometer casing through the #2 frame cross member. AA-17266 split style grommet was used in this cross member for the casing.
Attachments
Cross Member #2 Version 3.jpg
Cross Member #2 Version 3.jpg (70.37 KiB) Viewed 6347 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
rfj52
Posts: 81
Joined: November 21st, 2009, 2:57 am
Model Year: 1930

Re: SPEEDO CABLE FRAME BRACKET

Post by rfj52 »

Thanks guys.
dlevy
Posts: 187
Joined: April 12th, 2016, 9:20 pm
Body Type: 82B
Model Year: 1931

Re: SPEEDO CABLE FRAME BRACKET

Post by dlevy »

Hi

Does anyone have the dimensions for the grommet used for the speedometer cable through the frame cross members: AA-17266?

Or a source to get them.

Thanks
Dave
User avatar
Rumbler
Posts: 127
Joined: May 21st, 2017, 4:27 pm
Body Type: 82-A Stakebed
Model Year: 1928
Location: Central Illinois

Re: SPEEDO CABLE FRAME BRACKET

Post by Rumbler »

dlevy
Posts: 187
Joined: April 12th, 2016, 9:20 pm
Body Type: 82B
Model Year: 1931

Re: SPEEDO CABLE FRAME BRACKET

Post by dlevy »

Thank you!
Post Reply