roof material and seat slats

[birdacre]

two questions: there are four wooden seat slats. does each one have the arrow pointed metal tab at bottom? or is it just middle or outers? second question. rood consists of black fabric, padding and long grain cobra. hideum welt along edges and rain gutters over door. my question: is there an edging put on before any of this? i saw in marcos photos an edging which looked totally different. any ideas? what is this material called, please see at: http://abarnyard.com/temp/82-a/82a-30.jpg

[macswoods]

I used fender welting or you could use gas tank welting. Mac.

[birdacre]

thank you for info. i thought that is what it was. hope all is well. kevin

[Neil Wilson]

two questions: there are four wooden seat slats. does each one have the arrow pointed metal tab at bottom? or is it just middle or outers? second question. rood consists of black fabric, padding and long grain cobra. hideum welt along edges and rain gutters over door. my question: is there an edging put on before any of this? i saw in marcos photos an edging which looked totally different. any ideas? what is this material called, please see at: http://abarnyard.com/temp/82-a/82a-30.jpg

The seat back lower retainers were installed on the two center support boards.

The edging shown in Marco's photo is the first item installed when doing the roofing. I believe the bead is slightly smaller than fender welt. But, I have not seen any specifications.

[birdacre]

thank you once again neil. i have yet to see this product listed in the "roof" sections of the catalogues. they list others but not this. very strange. anyone else out there have any ideas? thank you neil. kevin oh, any ideas on door bumpers. do they just press in? seems like a weird set up, any photos? thank you