Note that #4 revision will then be mailed after MAFCA receives the order from the printer.UPDATE on NEW JS: December 17 - The long awaited Revision 4 to the Restoration Guidelines & Judging Standards was on its way to the MAFCA /MARC office when a mistake was discovered. The revision was not three-hole punched and rather than send our members a defective product, the truck was turned around and is going back to Michigan.
The RG&JS are shrink wrapped so the printer will need to open each package, three-hole punch them and reshrink wrap the book. This will take some time and delay our receipt of the new RG&JS until January. Both MARC and MAFCA apologize to the Model A community for the delay. This one was beyond our control. The printer is assuming full responsibility.
Doug Clayton, Publications Director
Revision 4 RGSJ
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Revision 4 RGSJ
FYI - The following was just received:
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Revision 4 RGSJ
I got mine.
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Revision 4 RGSJ
Sadly it is not compatible with my 1997 Judging Standards.