Body blocks
-
- Posts: 18
- Joined: March 27th, 2017, 9:44 pm
- Body Type: 82A
- Model Year: 1929
- Location: St Stephen Minnesota
Body blocks
Should new wood body blocks be treated with something (paint stain oil) before installing or just left natural? Thanks, Frank J
Re: Body blocks
I treated mine with black deck stain to help keep the bugs/rot at bay longer before I installed them in my A car. I thought it couldn't hurt
Gears, grease, and glory
Gears, grease, and glory
-
- Posts: 1223
- Joined: June 14th, 2007, 7:29 pm
- Body Type: Grainbox
- Model Year: 1929
- Location: Illinois
Re: Body blocks
I thought originally they were coated in a creosote type of stuff. I too am interested to see whats suggested.
I think anything even a basic like Thompson water seal would be better than nothing.
I think anything even a basic like Thompson water seal would be better than nothing.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Body blocks
The original finish and rubber pad information is found in the RGJS (page 4-18 and 4-19).FVOUK wrote:Should new wood body blocks be treated with something (paint stain oil) before installing or just left natural? Thanks, Frank J
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Body blocks
I made mine out of white oak and did not treat them with anything. I did not know if the wood preservative would make the metal rust or not. The ones I took out were in pretty good shape after all the years. My truck will not see all the mud that the truck saw when it was being worked hard. I think in another 50 years the oak will still be in good shape. Paint will help seal the water out and in if any gets in to the wood. Soaking the blocks in oil might be a good.
Apple truck
Apple truck