AA Rear Brakes Update
Posted: May 14th, 2003, 5:47 pm
Here's an update on the post I had here earlier.
I had trouble getting the E-brake levers(not the Service Brake levers) to index upward in the correct position. I had to pull everything down and switch the Backing Plates. I had the plates on the wrong side.
Now everything is lining up properly. Don't make the same mistake I made. Put some wire and a tag on everything as you dissassemble it.
It will pay dividends in reassembly time.
Bradshaw
I had trouble getting the E-brake levers(not the Service Brake levers) to index upward in the correct position. I had to pull everything down and switch the Backing Plates. I had the plates on the wrong side.
Now everything is lining up properly. Don't make the same mistake I made. Put some wire and a tag on everything as you dissassemble it.
It will pay dividends in reassembly time.
Bradshaw