Hi,
Does anyone know which holes are correct in the top rail of a 1931 AA frame?
Some holes are pretty symmetric between both sides, but some seem random.
On the left frame rail top going from the rear end to the 3rd cross member there are 10 holes and 11 holes on the right.
Thanks,
Dave
Holes in Frame - which are correct?
Holes in Frame - which are correct?
- Attachments
-
- 20170816_161405.jpg (137.93 KiB) Viewed 4209 times
-
- 20170816_161411.jpg (196.04 KiB) Viewed 4209 times
-
- 20170816_161358.jpg (173.56 KiB) Viewed 4209 times
-
- Posts: 375
- Joined: November 15th, 2008, 8:18 am
- Body Type: 186 stake
- Model Year: 1931
- Location: Hawthorne California
Re: Holes in Frame - which are correct?
Hi,
I have a long WB 31 and it has 9 5/8" holes on each side. I'm sure they were tooling holes for fabricating the frame. The holes you have in the same pattern ends right behind the last cross member. Don't know what to think about the other holes.
I have a long WB 31 and it has 9 5/8" holes on each side. I'm sure they were tooling holes for fabricating the frame. The holes you have in the same pattern ends right behind the last cross member. Don't know what to think about the other holes.
-
- Posts: 1442
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: Holes in Frame - which are correct?
What body goes on the chassis, I see it has three running board brackets for the long running boards.
Bob
Bob
Re: Holes in Frame - which are correct?
Hi,
I do not know which body was on the chassis originally. You are right that it had the long running boards. The first 2 running board supports are riveted to the chassis, the third one is bolted on.
I was going to make a flat bed for the chassis from frame pieces I bought from another Model AA.
Dave
I do not know which body was on the chassis originally. You are right that it had the long running boards. The first 2 running board supports are riveted to the chassis, the third one is bolted on.
I was going to make a flat bed for the chassis from frame pieces I bought from another Model AA.
Dave
- Attachments
-
- Resized_20160720_140905.jpeg (166.33 KiB) Viewed 4106 times
-
- Resized_20160720_140923.jpeg (231.76 KiB) Viewed 4106 times
-
- Resized_20160720_140936.jpeg (228.37 KiB) Viewed 4106 times
Re: Holes in Frame - which are correct?
one more picture
- Attachments
-
- Resized_20160720_140948.jpeg (960.74 KiB) Viewed 4106 times