Page 1 of 1

AA 1015C d4

Posted: October 11th, 2017, 3:52 pm
by Tim/va.
I purchased two 20" wheels that are slightly different than AA wheels. The center hole dia. is 5-5/8, one inch larger and the ctr-ctr mtg holes are 4-5/8, 5/8 inch further apart than the AA. Otherwise they are identical. Anyone know what they fit?

Re: AA 1015C d4

Posted: October 11th, 2017, 5:27 pm
by KimVanOrder
Wire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian. :lol:

Re: AA 1015C d4

Posted: October 11th, 2017, 6:31 pm
by Bob C
The AA wheel is 5 on 6 7/8", late 1934 and after are 5 on 8".

Bob

Re: AA 1015C d4

Posted: October 12th, 2017, 7:06 am
by Neil Wilson
Tim/va. wrote:
October 11th, 2017, 3:52 pm
I purchased two 20" wheels that are slightly different than AA wheels. The center hole dia. is 5-5/8, one inch larger and the ctr-ctr mtg holes are 4-5/8, 5/8 inch further apart than the AA. Otherwise they are identical. Anyone know what they fit?
You can find AA wheel dimensions information at http://aafords.com/aa-chassis/aa-1000-wheels/#wd. The bolt pattern was 6-7/8" for all but the AA-1015-E (1931 steel spoke wheel) which was 8".

Just include pictures! I don't know what "ctr-ctr mtg holes" means? Measure the bolt pattern (see the link for what this means).

Re: AA 1015C d4

Posted: October 15th, 2017, 5:36 am
by Tim/va.
The 5 hole wheel pattern is 9" outside edge , 7-1/2 on center. 20" wheel.

Re: AA 1015C d4

Posted: October 15th, 2017, 6:02 am
by Tim/va.
KimVanOrder wrote:
October 11th, 2017, 5:27 pm
Wire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian. :lol:
The aa-ford site.

Re: AA 1015C d4

Posted: October 15th, 2017, 6:57 am
by Neil Wilson
Tim/va. wrote:
October 15th, 2017, 6:02 am
KimVanOrder wrote:
October 11th, 2017, 5:27 pm
Wire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian. :lol:
The aa-ford site.
FYI - That's the aafords.com site at http://aafords.com/ (not aa-ford)