AA 1015C d4

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Tim/va.
Posts: 3
Joined: October 9th, 2017, 12:22 pm
Model Year: 1930

AA 1015C d4

Post by Tim/va. »

I purchased two 20" wheels that are slightly different than AA wheels. The center hole dia. is 5-5/8, one inch larger and the ctr-ctr mtg holes are 4-5/8, 5/8 inch further apart than the AA. Otherwise they are identical. Anyone know what they fit?
KimVanOrder
Posts: 753
Joined: August 11th, 2013, 4:25 pm
Body Type: 82-A Platform
Model Year: 1928
Location: Hamilton, Mich.

Re: AA 1015C d4

Post by KimVanOrder »

Wire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian. :lol:
KVO
Dec. '28 AA
Bob C
Posts: 1442
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Re: AA 1015C d4

Post by Bob C »

The AA wheel is 5 on 6 7/8", late 1934 and after are 5 on 8".

Bob
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: AA 1015C d4

Post by Neil Wilson »

Tim/va. wrote:
October 11th, 2017, 3:52 pm
I purchased two 20" wheels that are slightly different than AA wheels. The center hole dia. is 5-5/8, one inch larger and the ctr-ctr mtg holes are 4-5/8, 5/8 inch further apart than the AA. Otherwise they are identical. Anyone know what they fit?
You can find AA wheel dimensions information at http://aafords.com/aa-chassis/aa-1000-wheels/#wd. The bolt pattern was 6-7/8" for all but the AA-1015-E (1931 steel spoke wheel) which was 8".

Just include pictures! I don't know what "ctr-ctr mtg holes" means? Measure the bolt pattern (see the link for what this means).
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Tim/va.
Posts: 3
Joined: October 9th, 2017, 12:22 pm
Model Year: 1930

Re: AA 1015C d4

Post by Tim/va. »

The 5 hole wheel pattern is 9" outside edge , 7-1/2 on center. 20" wheel.
Attachments
20171015_075634-773x759.jpg
20171015_075634-773x759.jpg (244.48 KiB) Viewed 4285 times
Tim/va.
Posts: 3
Joined: October 9th, 2017, 12:22 pm
Model Year: 1930

Re: AA 1015C d4

Post by Tim/va. »

KimVanOrder wrote:
October 11th, 2017, 5:27 pm
Wire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian. :lol:
The aa-ford site.
Attachments
20171015_084756.png
20171015_084756.png (168.5 KiB) Viewed 4284 times
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: AA 1015C d4

Post by Neil Wilson »

Tim/va. wrote:
October 15th, 2017, 6:02 am
KimVanOrder wrote:
October 11th, 2017, 5:27 pm
Wire spoke or dish? and where did you get that # from? Probably Canadian? or Egyptian. :lol:
The aa-ford site.
FYI - That's the aafords.com site at http://aafords.com/ (not aa-ford)
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Post Reply