Page 2 of 2
Re: Putting Wire Spokes on the '28/'29
Posted: October 26th, 2017, 4:20 am
by bobmay1
- IMG_0801.JPG (637.73 KiB) Viewed 3575 times
Interesting - I had a set of caps on a truck and when I pulled front drivers it was a soup can. Fit pretty well. See bottom right of picture.
Sent from my iPhone using Tapatalk
Re: Putting Wire Spokes on the '28/'29
Posted: April 18th, 2018, 2:54 pm
by markt
The suppliers list a dust cap for the hub for the model A. I used this cap on my 28 AA and it fits under the hub cap just fine.
Re: Putting Wire Spokes on the '28/'29
Posted: April 19th, 2018, 9:30 am
by Stakebed
Can someone with wire spoke wheels measure and post the diameter opening in the wheel for the hubcap? Curious as to what I can find to snap in there.
Re: Putting Wire Spokes on the '28/'29
Posted: April 19th, 2018, 3:45 pm
by bobmay1
. Looks like 3 inches to me.
Sent from my iPhone using Tapatalk
Re: Putting Wire Spokes on the '28/'29
Posted: April 20th, 2018, 7:59 am
by Stakebed
perfect thank you!
. Looks like 3 inches to me.