exhaust manifold to inlet pipe donut

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
buddy
Posts: 18
Joined: March 13th, 2016, 2:03 pm
Body Type: AA flatbed
Model Year: 1929

exhaust manifold to inlet pipe donut

Post by buddy » November 10th, 2017, 6:46 pm

Anybody know where to get the do-nut gasket from the exhaust manifold to the inlet pipe? The one in my '29 is shot. I remember years ago they had asbestos in them. The Model A catalogs I've looked at don't carry them. Maybe another year one will fit?

User avatar
Neil Wilson
Posts: 2597
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: exhaust manifold to inlet pipe donut

Post by Neil Wilson » November 10th, 2017, 7:08 pm

buddy wrote:
November 10th, 2017, 6:46 pm
Anybody know where to get the do-nut gasket from the exhaust manifold to the inlet pipe? The one in my '29 is shot. I remember years ago they had asbestos in them. The Model A catalogs I've looked at don't carry them. Maybe another year one will fit?
FYI - The original Ford setup did not include anything between the muffler inlet pipe and exhaust manifold. The pipe and manifold were connected by the clamp only.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
www.aafords.com - AA information and photographs

Post Reply