Page 1 of 1

Information on 1928 seat support

Posted: November 17th, 2017, 11:21 am
by Rumbler
I am lacking seat support for my 1928 82-A truck. These are the boards that mount to the rear of the cab and support the upper seat cushion. From pictures I've seen they don't look complicated. Is there any information available on making these from scratch?

Thanks!
seat boards.png
seat boards.png (146.88 KiB) Viewed 4825 times

Re: Information on 1928 seat support

Posted: November 17th, 2017, 4:22 pm
by 1crosscut
No they are not too complicated to make. I made one to replace a broken one on my truck. Does anyone have one loose that you can take measurements off of for Brian?
If you don't get some measurements Brian let me know and I will pull my seats and try to get some accurate ones for you.

Re: Information on 1928 seat support

Posted: November 17th, 2017, 8:38 pm
by D L M Express
Brian,

I have one or two originals from a cab I had, I can get them to you for a pattern or measure them. let me know what works best. communication is best at...micscarz@yahoo.com

Mike

Re: Information on 1928 seat support

Posted: November 18th, 2017, 1:01 pm
by Rumbler
Dave provided the dimensions needed...thanks Dave!

Brian

Re: Information on 1928 seat support

Posted: November 18th, 2017, 4:48 pm
by KimVanOrder
I have patterns if some one needs them.

Re: Information on 1928 seat support

Posted: November 19th, 2017, 6:28 am
by Rumbler
I'm interested in the patterns you have.

Brian

Re: Information on 1928 seat support

Posted: November 19th, 2017, 3:29 pm
by KimVanOrder
I can also make you a set if you wish. ( they may already be made )!! I'll have to check this week..
kvo