I recently picked up a warford overdrive with almost perfect gears. I want to do a complete rebuild. Is there any source for gaskets or bearings?
Sent from my iPhone using Tapatalk
28/29 warford rebuild
- AAholic
- Posts: 278
- Joined: October 27th, 2010, 7:24 pm
- Body Type: 82-B
- Model Year: 1931
- Location: N.E.Illinois
Re: 28/29 warford rebuild
Those are some good looking gears, here's what I found from searching this forum, I hope it helps, maybe you can add some new information/sources to it.
viewtopic.php?f=1&t=465&p=2329&hilit=wa ... ings#p2329
viewtopic.php?f=1&t=465&p=2329&hilit=wa ... ings#p2329
Re: 28/29 warford rebuild
It would help if someone could post a schematic of all the parts and part numbers and part name. When you view the schematic, you need to know that part # 2038 and part number 1342 are reversed and in the wrong place. Hope you got the thrust washer 2038 if not I've posted the dimensions before on this forum. I rebuilt mine 5 yrs ago, most likely only the top shaft bearings have wear on them. Bearing #1342 I bought on ebay # 6210 with no seals cost $13.00. Bearing #1339 bought on ebay #6307rs, it has 2 seals remove only the one on inside of transmission.
good luck, carry on nick c
good luck, carry on nick c
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: 28/29 warford rebuild
Generally speaking products are designed to use bearings already in use. Take your bearings to a bearing supply and have them match them for you,