Page 1 of 1

28/29 warford rebuild

Posted: January 11th, 2018, 3:28 pm
by bobmay1
I recently picked up a warford overdrive with almost perfect gears. I want to do a complete rebuild. Is there any source for gaskets or bearings?ImageImage

Sent from my iPhone using Tapatalk

Re: 28/29 warford rebuild

Posted: January 14th, 2018, 10:21 pm
by AAholic
Those are some good looking gears, here's what I found from searching this forum, I hope it helps, maybe you can add some new information/sources to it.

viewtopic.php?f=1&t=465&p=2329&hilit=wa ... ings#p2329

Re: 28/29 warford rebuild

Posted: January 15th, 2018, 8:14 am
by njcar757
It would help if someone could post a schematic of all the parts and part numbers and part name. When you view the schematic, you need to know that part # 2038 and part number 1342 are reversed and in the wrong place. Hope you got the thrust washer 2038 if not I've posted the dimensions before on this forum. I rebuilt mine 5 yrs ago, most likely only the top shaft bearings have wear on them. Bearing #1342 I bought on ebay # 6210 with no seals cost $13.00. Bearing #1339 bought on ebay #6307rs, it has 2 seals remove only the one on inside of transmission.
good luck, carry on nick c

Re: 28/29 warford rebuild

Posted: January 15th, 2018, 12:04 pm
by Chris Haynes
Generally speaking products are designed to use bearings already in use. Take your bearings to a bearing supply and have them match them for you,