Page 1 of 1

28/29 rear wheel stud length.

Posted: February 21st, 2018, 6:14 am
by s147881
I have April 29 AATruck that has 2” long wheel studs on rear. I need to replace them. I called Bert’s and they have 1 3/4 or 2 1/4. lengths only. The 2 1/4 have 1 1/4 inch shaft with 1 inch of thread. My studs have 7/8 shaft with 1 1/8 inch threads. I will be installing wire wheels on this truck. Does anyone know which studs will work best?

Re: 28/29 rear wheel stud length.

Posted: February 21st, 2018, 6:23 pm
by Neil Wilson
s147881 wrote:
February 21st, 2018, 6:14 am
I have April 29 AATruck that has 2” long wheel studs on rear. I need to replace them. I called Bert’s and they have 1 3/4 or 2 1/4. lengths only. The 2 1/4 have 1 1/4 inch shaft with 1 inch of thread. My studs have 7/8 shaft with 1 1/8 inch threads. I will be installing wire wheels on this truck. Does anyone know which studs will work best?
Post a picture!

Re: 28/29 rear wheel stud length.

Posted: February 22nd, 2018, 3:42 pm
by s147881
I removed a couple of studs from a hub from scrape pile. They measured 1 3/4”.

Re: 28/29 rear wheel stud length.

Posted: February 22nd, 2018, 3:47 pm
by bobmay1
Image
Image
Image
Looks like the 1.75 inch length is correct for wire wheels.


Sent from my iPhone using Tapatalk

Re: 28/29 rear wheel stud length.

Posted: February 22nd, 2018, 4:56 pm
by Bob C
The big green parts book shows over all length 2.12, thread 1.09, shoulder .84, shoulder diameter .88.
RH part # AA-1118-A, LH AA-1119-A

Bob