29 express spare wheel mount.

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
bobmay1
Posts: 42
Joined: October 26th, 2017, 4:16 am
Model Year: 1930

29 express spare wheel mount.

Post by bobmay1 » March 31st, 2018, 10:43 am

When I bought a early 30 express truck it came with a front fender mounted spare tire mount that was installed next to the box (side mount). They cut out a section of the box to make it work - ouch! Over the last 4 years I have searched for the right side mount with no luck. I did find two front fender mounts to go with the one I already had. Looking on the AA truck web site I found Neil’s “wheel Carrier Side Installation #3 - 89A” which detailed all the info I needed to make one from the front fender ones I had. This morning I set out to try it. First I mounted one to the frame and heated it to bend it to the right angleImageImage. After this the top was at the wrong angle - so I heated at the bend to get it in the right orientation.
ImageImage
This left the side carrier 2 3/4 inches to tall. I cut a section out and beveled the edges in preparation for welding.ImageImageImage
Then mounted it and tacked it to make sure she was right. When every thing was aligned I welded it up and ground it clean.ImageImageImageImageImage




Sent from my iPhone using Tapatalk

User avatar
Neil Wilson
Posts: 2859
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: 29 express spare wheel mount.

Post by Neil Wilson » March 31st, 2018, 12:32 pm

Wow - that is great. An original carrier for a 1929 AA express is about impossible to find. Let us know how the tire fits once the express body and running board are installed.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

User avatar
s147881
Posts: 381
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

Re: 29 express spare wheel mount.

Post by s147881 » March 31st, 2018, 3:57 pm

I will - your drawings made it possible.

bobmay1
Posts: 42
Joined: October 26th, 2017, 4:16 am
Model Year: 1930

Re: 29 express spare wheel mount.

Post by bobmay1 » April 2nd, 2018, 3:26 pm

Image
Fit looks really good as distance from running board is same thickness as tires on truck.


Sent from my iPhone using Tapatalk

User avatar
s147881
Posts: 381
Joined: April 13th, 2007, 8:09 pm
Body Type: stake bed 82A
Model Year: 1930
Location: Decatur Michigan

Re: 29 express spare wheel mount.

Post by s147881 » April 4th, 2018, 7:11 pm

Does someone have measurements of the straight horizontal run of an original up to where it starts to curve up as measured from the out side of the frame? The one I made did not go thru the hole in splash apron like it should. It was a little high as it was curving upward. I think I need to add in a short piece there.

bobmay1
Posts: 42
Joined: October 26th, 2017, 4:16 am
Model Year: 1930

Re: 29 express spare wheel mount.

Post by bobmay1 » April 5th, 2018, 5:25 pm

s147881 wrote:Does someone have measurements of the straight horizontal run of an original up to where it starts to curve up as measured from the out side of the frame? The one I made did not go thru the hole in splash apron like it should. It was a little high as it was curving upward. I think I need to add in a short piece there.

Bed fit up looks not to bad
ImageImage


Sent from my iPhone using Tapatalk

gad62
Posts: 25
Joined: March 19th, 2019, 8:44 am
Body Type: Express
Model Year: 1929
Location: Ohio

Re: 29 express spare wheel mount.

Post by gad62 » February 16th, 2020, 6:10 pm

So how did you come out on this project??? Thinkin im gonna have to build my own also!!

bobmay1
Posts: 42
Joined: October 26th, 2017, 4:16 am
Model Year: 1930

Re: 29 express spare wheel mount.

Post by bobmay1 » February 17th, 2020, 9:23 am

ImageImageImage

It came out great! I love driving it. Lots of compliments


Sent from my iPhone using Tapatalk

birdacre
Posts: 453
Joined: October 8th, 2013, 2:37 pm
Body Type: AA express
Model Year: 1928

Re: 29 express spare wheel mount.

Post by birdacre » February 17th, 2020, 12:25 pm

i have one of these from a 30 AA. any interest anyone? i can take photos. thank you, kevin

gad62
Posts: 25
Joined: March 19th, 2019, 8:44 am
Body Type: Express
Model Year: 1929
Location: Ohio

Re: 29 express spare wheel mount.

Post by gad62 » February 17th, 2020, 1:33 pm

Birdacre....im interested....just may not be able to afford the thing!! :roll: greg
Last edited by gad62 on February 17th, 2020, 1:43 pm, edited 1 time in total.

gad62
Posts: 25
Joined: March 19th, 2019, 8:44 am
Body Type: Express
Model Year: 1929
Location: Ohio

Re: 29 express spare wheel mount.

Post by gad62 » February 17th, 2020, 1:36 pm

Bobmay1....nice truck!!! Id be danged proud of that one!!

birdacre
Posts: 453
Joined: October 8th, 2013, 2:37 pm
Body Type: AA express
Model Year: 1928

Re: 29 express spare wheel mount.

Post by birdacre » February 17th, 2020, 5:47 pm

my spare mount is off a 30 AA. it has the front fender indented. it bolts to frame. it looks the same as what i see here. any comments or ideas Neil??? would this create what we see in photos, this being what you want?

birdacre
Posts: 453
Joined: October 8th, 2013, 2:37 pm
Body Type: AA express
Model Year: 1928

Re: 29 express spare wheel mount.

Post by birdacre » February 17th, 2020, 6:02 pm

i guess i have what he started with for one side. i was a bit confused by the description in the start of thread. so... if anyone wants to use this method to make what is shown message me. i may have two of them too.

gad62
Posts: 25
Joined: March 19th, 2019, 8:44 am
Body Type: Express
Model Year: 1929
Location: Ohio

Re: 29 express spare wheel mount.

Post by gad62 » February 18th, 2020, 7:56 am

Birdacre....i sent you a pm

User avatar
Neil Wilson
Posts: 2859
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: 29 express spare wheel mount.

Post by Neil Wilson » February 20th, 2020, 6:19 pm

birdacre wrote:
February 17th, 2020, 5:47 pm
my spare mount is off a 30 AA. it has the front fender indented. it bolts to frame. it looks the same as what i see here. any comments or ideas Neil??? would this create what we see in photos, this being what you want?
Birdcage,
Post a picture of what you have. No since guessing!
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

Post Reply