firewall upgrade to my M30 platform

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
User avatar
mikeg
Site Admin
Posts: 160
Joined: January 15th, 2003, 4:08 pm
Body Type: 150B
Model Year: 1930
Location: San Juan Islands, Washington
Contact:

firewall upgrade to my M30 platform

Post by mikeg » April 21st, 2018, 10:09 am

The most significant modification I'll make to my truck is the installation of a '31 indented firewall and '31 gas tank.

Was the firewall spot welded, riveted or were machine screws used to fasten the firewall to the body? From the random holes along the body where the firewall slips in it would appear it was spot welded. It's been a long while, but I recall having to drill out spot welds to remove the original firewall.

The picture below is the inside bracket where it ties to the door pillar, was this riveted or welded?
Attachments
firewall_bracket.jpg
firewall_bracket.jpg (102.46 KiB) Viewed 506 times

flatford39
Posts: 438
Joined: September 24th, 2009, 3:06 pm
Body Type: Express
Model Year: 1928
Location: NE Illinois

Re: firewall upgrade to my M30 platform

Post by flatford39 » April 22nd, 2018, 7:38 am

It was spot welded on. You need to tack weld it back in.

Post Reply