How much grease should I add to the rear end? (Bevel Gear)
- s147881
- Posts: 425
- Joined: April 13th, 2007, 8:09 pm
- Body Type: stake bed 82A
- Model Year: 1930
- Location: Decatur Michigan
How much grease should I add to the rear end? (Bevel Gear)
I have the 30-31 bevel gear rear end and was wondering how much grease to add? I think it takes the 600 weight. Thanks in advance.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
The rear axle should be filled with oil up to the filler plug hole. And, if you add too much, let it run out before replacing the plug.
I have never seen a specification on the quality of oil used.
I have never seen a specification on the quality of oil used.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/