Working on 29 AA brakes, there are 2 long return springs on front brake rods and 2 short return springs on 2 rear rods. If I order a 6 piece spring kit for the A car, will these fit the 29 AA ?
thanks nick c
Brake rod anti rattle return springs
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Brake rod anti rattle return springs
Nick,
As per the RGJS E supplement - All brake rod retracting springs were black enamel and were the same as those used on the A chassis. Refer to Area 7 of the RGJS.
So, if what you are ordering is actually the A chassis springs, then the answer is yes.
As per the RGJS E supplement - All brake rod retracting springs were black enamel and were the same as those used on the A chassis. Refer to Area 7 of the RGJS.
So, if what you are ordering is actually the A chassis springs, then the answer is yes.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/