Page 1 of 1
29 four speed
Posted: January 16th, 2019, 5:54 pm
by s147881
I have a 1929 four speed transmission that has a universal joint mounted to the back that the intermediate shaft goes into. Is this the original setup? My 30 has a gear on the back that goes into the intermediate shaft.
Re: 29 four speed
Posted: January 16th, 2019, 11:29 pm
by Chris Haynes
It could have been connected to a Warford in which case it would have a U Joint.
Re: 29 four speed
Posted: January 17th, 2019, 9:09 am
by Bob C
If the u-joint looks like the one in the picture the transmission came out of a 1930-31 truck with a service replacement coupling shaft.
Can you post a picture of what you have?
Bob
- coupling-2.jpg (491.06 KiB) Viewed 3486 times
Re: 29 four speed
Posted: January 17th, 2019, 4:22 pm
by bobmay1
Transmission is out of truck.
Sent from my iPhone using Tapatalk
Re: 29 four speed
Posted: January 17th, 2019, 6:54 pm
by Bob C
Interesting, I don't think I have ever seen a bearing retainer like that. The u-joint is the one in the picture above
for the service replacement coupling shaft.