Hub Puller

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
David R.
Posts: 119
Joined: August 17th, 2019, 1:52 pm
Body Type: Chassis
Model Year: 1930
Location: WV

Hub Puller

Post by David R. » December 6th, 2019, 6:59 pm

Will this type work on AA rear hub?
82611D38-B9CB-48D5-987B-D83E3A21610E.png
82611D38-B9CB-48D5-987B-D83E3A21610E.png (550.21 KiB) Viewed 787 times

dlevy
Posts: 55
Joined: April 12th, 2016, 9:20 pm
Body Type: 82B
Model Year: 1931

Re: Hub Puller

Post by dlevy » December 6th, 2019, 9:32 pm

Yes. It most certainly will.

I made an adapter plate to attach it.

Dave
Attachments
P1100880.JPG
P1100880.JPG (201.52 KiB) Viewed 778 times
P1100881.JPG
P1100881.JPG (288.99 KiB) Viewed 778 times

David R.
Posts: 119
Joined: August 17th, 2019, 1:52 pm
Body Type: Chassis
Model Year: 1930
Location: WV

Re: Hub Puller

Post by David R. » December 7th, 2019, 5:04 am

OK, I added one to my Christmas list! Haven’t started on rear axle yet. Working on front axle and engine. I guess I will work my way back.

dlevy
Posts: 55
Joined: April 12th, 2016, 9:20 pm
Body Type: 82B
Model Year: 1931

Re: Hub Puller

Post by dlevy » December 7th, 2019, 6:36 am

These are the dimensions of the adapter I made. Fit great.

I cut it on a laser at my friend's shop.

Dave
Attachments
Rear Hub Puller Adapter-Model.jpg
Rear Hub Puller Adapter-Model.jpg (366.55 KiB) Viewed 761 times

User avatar
Neil Wilson
Posts: 2809
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Hub Puller

Post by Neil Wilson » December 7th, 2019, 6:48 am

Alternative to making an adapter plate. Use wheels which are no good and drill three extra holes to bolt on the puller.
Attachments
AA Rear Hub Puller 3 q8.jpg
AA Rear Hub Puller 3 q8.jpg (464.84 KiB) Viewed 759 times
AA Rear Hub Puller 2.jpg
AA Rear Hub Puller 2.jpg (33 KiB) Viewed 759 times
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

David R.
Posts: 119
Joined: August 17th, 2019, 1:52 pm
Body Type: Chassis
Model Year: 1930
Location: WV

Re: Hub Puller

Post by David R. » December 7th, 2019, 7:43 am

Good idea on old wheels. Glad I haven’t junked the bad ones yet.

User avatar
Chris Haynes
Posts: 2099
Joined: September 7th, 2003, 5:18 pm
Body Type: 82A
Model Year: 1930
Location: North Hills, CA/ Pine Grove, CA

Re: Hub Puller

Post by Chris Haynes » December 7th, 2019, 1:03 pm

I got lucky and found an original KR Wilson puller on eBay. But then my rear end came apart without needing it.

Shorthaul
Posts: 323
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

Re: Hub Puller

Post by Shorthaul » January 5th, 2020, 2:36 pm

Did that hub puller work on the rear wheels?

David R.
Posts: 119
Joined: August 17th, 2019, 1:52 pm
Body Type: Chassis
Model Year: 1930
Location: WV

Re: Hub Puller

Post by David R. » January 5th, 2020, 7:05 pm

I haven’t had a chance to try it yet. I did do like some of the guys here suggested and cut the center out of one of my junk wheels for an adapter. I haven’t gotten to rear axle yet. Decided to pull engine first.

Post Reply