Hub Puller
-
- Posts: 260
- Joined: August 17th, 2019, 1:52 pm
- Body Type: Chassis
- Model Year: 1930
- Location: WV
Hub Puller
Will this type work on AA rear hub?
Re: Hub Puller
Yes. It most certainly will.
I made an adapter plate to attach it.
Dave
I made an adapter plate to attach it.
Dave
- Attachments
-
- P1100880.JPG (201.52 KiB) Viewed 4999 times
-
- P1100881.JPG (288.99 KiB) Viewed 4999 times
-
- Posts: 260
- Joined: August 17th, 2019, 1:52 pm
- Body Type: Chassis
- Model Year: 1930
- Location: WV
Re: Hub Puller
OK, I added one to my Christmas list! Haven’t started on rear axle yet. Working on front axle and engine. I guess I will work my way back.
Re: Hub Puller
These are the dimensions of the adapter I made. Fit great.
I cut it on a laser at my friend's shop.
Dave
I cut it on a laser at my friend's shop.
Dave
- Attachments
-
- Rear Hub Puller Adapter-Model.jpg (366.55 KiB) Viewed 4982 times
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Hub Puller
Alternative to making an adapter plate. Use wheels which are no good and drill three extra holes to bolt on the puller.
- Attachments
-
- AA Rear Hub Puller 3 q8.jpg (464.84 KiB) Viewed 4980 times
-
- AA Rear Hub Puller 2.jpg (33 KiB) Viewed 4980 times
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
-
- Posts: 260
- Joined: August 17th, 2019, 1:52 pm
- Body Type: Chassis
- Model Year: 1930
- Location: WV
Re: Hub Puller
Good idea on old wheels. Glad I haven’t junked the bad ones yet.
- Chris Haynes
- Posts: 2203
- Joined: September 7th, 2003, 5:18 pm
- Body Type: 82A
- Model Year: 1930
- Location: Camarillo, CA
Re: Hub Puller
I got lucky and found an original KR Wilson puller on eBay. But then my rear end came apart without needing it.
-
- Posts: 375
- Joined: November 15th, 2008, 8:18 am
- Body Type: 186 stake
- Model Year: 1931
- Location: Hawthorne California
Re: Hub Puller
Did that hub puller work on the rear wheels?
-
- Posts: 260
- Joined: August 17th, 2019, 1:52 pm
- Body Type: Chassis
- Model Year: 1930
- Location: WV
Re: Hub Puller
I haven’t had a chance to try it yet. I did do like some of the guys here suggested and cut the center out of one of my junk wheels for an adapter. I haven’t gotten to rear axle yet. Decided to pull engine first.