Page 1 of 1

Rim Shell for 20 inch Tires

Posted: January 10th, 2020, 5:58 am
by Alan S. - SC
Has anyone done away with the lock ring on their rims by moving a slotted wheel center to a modern drop rim? (Tried searching on Rim but ran into the 'Must be more that 3 chars rule'.)

Re: Rim Shell for 20 inch Tires

Posted: January 11th, 2020, 5:33 am
by David R.
Someone posted on here about doing that but it looked pretty costly. I decided after doing a couple mounts on split rims myself, that as long as I could find enough good rims and wheels to stay original. Once you get a full understanding of the precautions needed the mounting is very easy. You could do the whole job with your bare hands, except I used a hardwood block and hammer to make sure the ring was fully seated before putting in air. The necessary item is a remote air hose set up so you are nowhere near the ring as it is inflated. You can find some good videos on the net. They all recommend a cage and I had a local shop offer to give me one, but don’t have room for it. I did loop a cable through the wheel slots and around tire just in case.

Re: Rim Shell for 20 inch Tires

Posted: January 12th, 2020, 4:51 am
by David R.
68955AF4-B077-4668-8F11-36402F91B7D1.png
68955AF4-B077-4668-8F11-36402F91B7D1.png (158.32 KiB) Viewed 3071 times
I saved this from the previous thread on this subject.