PTO and hydraulic lever

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Matt
Posts: 134
Joined: December 8th, 2013, 4:21 pm
Body Type: 76-A
Model Year: 1929
Location: 8453 Main St Kinsman Ohio 44428

PTO and hydraulic lever

Post by Matt »

My truck is missing the pto and hydraulic lever, could someone please post a picture of the pto and hydraulic lever in the cab?

Thanks
Matt
Cschaff63
Posts: 98
Joined: September 14th, 2017, 5:57 pm
Body Type: Dump
Model Year: 1928
Location: Pa

Re: PTO and hydraulic lever

Post by Cschaff63 »

D80FED1A-1FF1-483F-B0A1-993161EC0F6C.jpeg
D80FED1A-1FF1-483F-B0A1-993161EC0F6C.jpeg (66.72 KiB) Viewed 6205 times
EEBBAF24-2D83-4FB7-8A5B-0E9A9C2D2E5E.jpeg
EEBBAF24-2D83-4FB7-8A5B-0E9A9C2D2E5E.jpeg (90.91 KiB) Viewed 6205 times
0875AFC6-9EC2-4CEC-B467-7DF11F33F24D.jpeg
0875AFC6-9EC2-4CEC-B467-7DF11F33F24D.jpeg (119.6 KiB) Viewed 6205 times
306ED9A8-4609-4C11-A089-AEC3DEEC40EA.jpeg
306ED9A8-4609-4C11-A089-AEC3DEEC40EA.jpeg (815.25 KiB) Viewed 6205 times
Matt
Posts: 134
Joined: December 8th, 2013, 4:21 pm
Body Type: 76-A
Model Year: 1929
Location: 8453 Main St Kinsman Ohio 44428

Re: PTO and hydraulic lever

Post by Matt »

Thank you that will help a lot.

Matt
Cschaff63
Posts: 98
Joined: September 14th, 2017, 5:57 pm
Body Type: Dump
Model Year: 1928
Location: Pa

Re: PTO and hydraulic lever

Post by Cschaff63 »

Here are a couple better pics
5D2AA8E9-4A1E-4326-AE48-C315693B9880.jpeg
5D2AA8E9-4A1E-4326-AE48-C315693B9880.jpeg (77.9 KiB) Viewed 6181 times
22D53108-20CA-40B5-8D04-02D4BCA14B36.jpeg
22D53108-20CA-40B5-8D04-02D4BCA14B36.jpeg (95.65 KiB) Viewed 6181 times
User avatar
stew
Posts: 70
Joined: June 2nd, 2012, 4:46 am
Body Type: dump
Model Year: 1931
Location: Lake Mills, Wisconsin

Re: PTO and hydraulic lever

Post by stew »

Our truck has a little different set-up. It is equipped with a hydraulic dump body by The Marion Steel Body Company, of Marion, Ohio.
The PTO lever pivots on a longer bolt that is also used for mounting the hand brake. The small crank shaped rod that is under the seat, goes out through the back of the cab, and operates the hydraulic valve. Turning it to one side puts the valve in the raise position, turning it the other way lowers it. Leaving it in the center position holds the box in position.
AA truck trans.JPG
AA truck trans.JPG (386.51 KiB) Viewed 6099 times
Attachments
MARC 1978 National Meet Dearborn 1.jpg
MARC 1978 National Meet Dearborn 1.jpg (832.67 KiB) Viewed 6099 times
Always one bad decision away from a good time.
Cschaff63
Posts: 98
Joined: September 14th, 2017, 5:57 pm
Body Type: Dump
Model Year: 1928
Location: Pa

Re: PTO and hydraulic lever

Post by Cschaff63 »

My dump body and pto setup are by Woods Hyd
Post Reply