AA Drivers pedal question

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
David R.
Posts: 157
Joined: August 17th, 2019, 1:52 pm
Body Type: Chassis
Model Year: 1930
Location: WV

AA Drivers pedal question

Post by David R. » May 19th, 2020, 8:13 pm

Going through two transmissions trying to make one on my AA project. Can’t help but notice on both units; clutch pedals very worn, ribs worn partially away. Brake pedals on the other hand show almost no wear. Obviously ‘a whole lotta shiftin goin on’.
I see most of the suppliers sell replacement weld on pedals. My question is, as far as drivability is concerned, is it worth the trouble, for practical purposes that is?
To phrase the question another way; would a nice new crisp ribbed pedal make any difference to the driver compared to a well worn one?

User avatar
macswoods
Posts: 287
Joined: May 4th, 2009, 1:20 pm
Body Type: 82-A
Model Year: 1929
Location: Wilhoit, Arizona

Re: AA Drivers pedal question

Post by macswoods » May 19th, 2020, 10:25 pm

get a set of rubber pedal covers from suppliers. Will slip on over the worn one.

KimVanOrder
Posts: 645
Joined: August 11th, 2013, 4:25 pm
Body Type: 82-A Platform
Model Year: 1928
Location: Hamilton, Mich.

Re: AA Drivers pedal question

Post by KimVanOrder » May 20th, 2020, 3:10 pm

You already know the answer, No diference, only if you look at it.. So don't look.. and all is well?? :shock:
KVO
Dec. '28 AA

David R.
Posts: 157
Joined: August 17th, 2019, 1:52 pm
Body Type: Chassis
Model Year: 1930
Location: WV

Re: AA Drivers pedal question

Post by David R. » May 20th, 2020, 6:14 pm

KimVanOrder wrote:
May 20th, 2020, 3:10 pm
You already know the answer, No diference, only if you look at it.. So don't look.. and all is well?? :shock:
Ah ...yes, keep your eyes on the road! Good answer.

Post Reply