Bevel Gear Axle Bearing Surface OD

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
User avatar
Neil Wilson
Posts: 2915
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Bevel Gear Axle Bearing Surface OD

Post by Neil Wilson » August 5th, 2020, 6:49 am

Anyone know the outside diameter (nominal OD and tolerance) for the 1930/1931 bevel-gear axle housing bearing surface? This is a question from a FMAATC club member.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

Rustynut
Posts: 11
Joined: October 31st, 2020, 11:06 pm
Body Type: C-Cab
Model Year: 1930
Location: Campbell, CA

Re: Bevel Gear Axle Bearing Surface OD

Post by Rustynut » December 12th, 2020, 5:57 pm

Currently restoring an early 1930 AA C-Cab Ice Truck.
Just completed having the rear axle housing bearing surfaces for wheel hub bearings restored (bevel gear style).
Posting the "before" & "after" photos and repair info for reference:
Finished diameter: 2.875 inches
Repair method: Thermal Spray Fuse Coating (by Babbitt Bearing, San Jose CA)
Model AA Axle Housing Bearing Surface Repair.png
Model AA Axle Housing Bearing Surface Repair.png (1.07 MiB) Viewed 599 times

User avatar
Neil Wilson
Posts: 2915
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Bevel Gear Axle Bearing Surface OD

Post by Neil Wilson » December 14th, 2020, 3:38 pm

Rustynut wrote:
December 12th, 2020, 5:57 pm
Currently restoring an early 1930 AA C-Cab Ice Truck.
Just completed having the rear axle housing bearing surfaces for wheel hub bearings restored (bevel gear style).
Posting the "before" & "after" photos and repair info for reference:
Finished diameter: 2.875 inches
Repair method: Thermal Spray Fuse Coating (by Babbitt Bearing, San Jose CA)
Model AA Axle Housing Bearing Surface Repair.png
Thank you Rustynut for sharing the information.
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

Post Reply