Hi,
I picked up 2 different stop light actuators, but could someone tell me which is correct for a 1931 AA 131" with a 4-speed?
The packages, shown below, both indicate 1931 which has me puzzled to know which is correct.
Also, both my service and parking brake rods that go from the peddle/handle to the respective cross shafts have some slight bends in them. Should I straighten them out or are the bends appropriate?
Thanks for any guidance.
Dave
Question: Stop Light Actuator & Brake Rods
Question: Stop Light Actuator & Brake Rods
- Attachments
-
- IMG_0337.JPEG (674.01 KiB) Viewed 3562 times
-
- Posts: 1444
- Joined: April 24th, 2003, 11:50 am
- Body Type: Mail truck, Stake tr
- Model Year: 1931
- Location: SO CAL
Re: Question: Stop Light Actuator & Brake Rods
The finger was used until September 1930 and the chain September 1930 to the end of production.
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Question: Stop Light Actuator & Brake Rods
The break rod should be straight (like all A and AA chassis break rods).
And, yes to Bob C. answer to dates.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Question: Stop Light Actuator & Brake Rods
Thank you again!