Page 1 of 1

Question: Stop Light Actuator & Brake Rods

Posted: September 16th, 2020, 7:27 pm
by dlevy
Hi,

I picked up 2 different stop light actuators, but could someone tell me which is correct for a 1931 AA 131" with a 4-speed?

The packages, shown below, both indicate 1931 which has me puzzled to know which is correct.

Also, both my service and parking brake rods that go from the peddle/handle to the respective cross shafts have some slight bends in them. Should I straighten them out or are the bends appropriate?

Thanks for any guidance.

Dave

Re: Question: Stop Light Actuator & Brake Rods

Posted: September 16th, 2020, 7:35 pm
by Bob C
The finger was used until September 1930 and the chain September 1930 to the end of production.

Re: Question: Stop Light Actuator & Brake Rods

Posted: September 17th, 2020, 8:59 am
by Neil Wilson
dlevy wrote:
September 16th, 2020, 7:27 pm
Also, both my service and parking brake rods that go from the peddle/handle to the respective cross shafts have some slight bends in them. Should I straighten them out or are the bends appropriate?Dave
The break rod should be straight (like all A and AA chassis break rods).

And, yes to Bob C. answer to dates.

Re: Question: Stop Light Actuator & Brake Rods

Posted: September 17th, 2020, 8:37 pm
by dlevy
Thank you again!