U joint

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Shorthaul
Posts: 375
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

U joint

Post by Shorthaul »

AA TRUCK. I’m wondering if there is a source for A U Joint
Shorthaul
Posts: 375
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

Re: U joint

Post by Shorthaul »

It looks like Mac's has complete U Joint assembly for $98.00
David R.
Posts: 260
Joined: August 17th, 2019, 1:52 pm
Body Type: Chassis
Model Year: 1930
Location: WV

Re: U joint

Post by David R. »

I don’t think car ujoint works on trucks
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: U joint

Post by Neil Wilson »

Shorthaul wrote:
October 14th, 2020, 11:44 am
AA TRUCK. I’m wondering if there is a source for A U Joint
Shorthaul, you don't indicate what truck and which u-joint?
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Shorthaul
Posts: 375
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

Re: U joint

Post by Shorthaul »

Neil, the truck I have is a Aa stake bed 157 WB. I needed the rear U joint

I found a U joint kit at Macs for $49.00 its the center part the connects the two housings. That all I needed, my housings were good. I think they sell the complet U joint for around a $100.00
Bob C
Posts: 1442
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Re: U joint

Post by Bob C »

Did you get AA-7084 because the ones for Model A's are different than AA's.
Shorthaul
Posts: 375
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

Re: U joint

Post by Shorthaul »

Thanks, I think I got led astray on their chat line
I must have got the wrong one. I hope I can return it.

I also need the gasket material for that bell type housing that attaches to the drive shaft housing. Any idea?
Bob C
Posts: 1442
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Re: U joint

Post by Bob C »

Which part numbers are you asking about?
AA-4802-BP1.jpg
AA-4802-BP1.jpg (507.45 KiB) Viewed 8685 times
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: U joint

Post by Neil Wilson »

Bob C wrote:
October 24th, 2020, 7:12 pm
Which part numbers are you asking about?AA-4802-BP1.jpg
Bob, If you have a higher resolution version of the drawing you posted, please email me (neil@aafords.com). Do you have the US Ford drawing as well?
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Bob C
Posts: 1442
Joined: April 24th, 2003, 11:50 am
Body Type: Mail truck, Stake tr
Model Year: 1931
Location: SO CAL

Re: U joint

Post by Bob C »

That's all I have Neil. If I right click on it then select View Image it becomes larger.
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: U joint

Post by Neil Wilson »

Bob C wrote:
October 25th, 2020, 9:13 am
That's all I have Neil. If I right click on it then select View Image it becomes larger.
Okay Bob,
I downloaded the image. I is 507 kb in size. I was hoping you have the image as a higher resolution. Thanks for checking.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Shorthaul
Posts: 375
Joined: November 15th, 2008, 8:18 am
Body Type: 186 stake
Model Year: 1931
Location: Hawthorne California

Re: U joint

Post by Shorthaul »

Thanks guys, I not sure who I’m answering. That’s a great image of what I’m dealing with. I’m on a iPhone so I have to Get to a better instrument before figuring it all out. 82 year old eyes.
User avatar
rsierk
Posts: 95
Joined: February 23rd, 2005, 7:27 pm
Body Type: 185-B
Model Year: 1931
Location: Christiana PA

Re: U joint

Post by rsierk »

Looks like a GAZ drawing. Wouldn't there be a Dearborn equivalent?
Lvovich
Posts: 5
Joined: January 25th, 2018, 2:36 pm
Body Type: A 82-c
Model Year: 1931

Re: U joint

Post by Lvovich »

Neil I have a normal resolution file for you (3228x2165)
But I can't attach it to the post.
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: U joint

Post by Neil Wilson »

Lvovich wrote:
October 26th, 2020, 1:39 am
Neil I have a normal resolution file for you (3228x2165)
But I can't attach it to the post.
Lvovich, Please email your 3228x2165 image to me at neil@aafords.com. I can then zoom in on my computer much easier. Thanks in advance.

This AA-Fords.com site restricts image sizes.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Post Reply