Hi,
For the 1931 AA with the 4-speed, is there a special plate that goes around the transmission tower?
Thanks,
Dave
Floor Board Metal Covers
-
- Posts: 180
- Joined: April 13th, 2016, 8:26 am
- Body Type: 89
- Model Year: 1928
Re: Floor Board Metal Covers
Yes it is a steel plate that goes around the shifter and e-brake handle. Let me know if you need one.
Charlie
Charlie
- Neil Wilson
- Posts: 3062
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Floor Board Metal Covers
Dave, Attached is the AA-82245 e-lever plate. There is one on Ebay @ https://www.ebay.com/itm/194473556655?s ... 1438.l2649
FYI - The #1 floor board requires a grove (bottom side) to prevent the AA brake pedal from hitting. I have drawings of the #1fb and #2fb for AA-chassis with 4-speed if you need them. Email neil@aafords.com
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Floor Board Metal Covers
Hi,
Yes, I do need one.
Neil, thank you for the picture and info!
Thanks,
Dave
Yes, I do need one.
Neil, thank you for the picture and info!
Thanks,
Dave
-
- Posts: 180
- Joined: April 13th, 2016, 8:26 am
- Body Type: 89
- Model Year: 1928
Re: Floor Board Metal Covers
Hi:
Contact me at rustya1931@hotmail.com and I can send you photos and a price. I have a couple of these.
Thanks Charlie
Contact me at rustya1931@hotmail.com and I can send you photos and a price. I have a couple of these.
Thanks Charlie