Connecting parts from Coupling shaft to Transmission
Posted: November 21st, 2021, 8:43 pm
I am in the process of restoring a 1930 AA truck Dump truck that has a 131" Frame.
I found from the FMATC Magazine that I am missing a few parts.
The short coupling shaft I have, but no housing or, only about 10% of housing.
Looking at the pictures in the magazine it looks as though I need a list of parts.
They are:
AA-4810-B Front Support(Coupling shaft housing)
AA-4811 Male Gear (Coupling shaft)
AA-7095 Retainer (Male Gear) about 1.35" Dia.
AA-4826 Locating Screw 3/8 x 24 x 1 hex conical head
AA-4822 Thrust Spring (Coupling Shaft)
AA-4804-B housing (Coupling Shaft)
I know this is a long I want list. If anyone has or knows where I might get these parts please let me know.
I found from the FMATC Magazine that I am missing a few parts.
The short coupling shaft I have, but no housing or, only about 10% of housing.
Looking at the pictures in the magazine it looks as though I need a list of parts.
They are:
AA-4810-B Front Support(Coupling shaft housing)
AA-4811 Male Gear (Coupling shaft)
AA-7095 Retainer (Male Gear) about 1.35" Dia.
AA-4826 Locating Screw 3/8 x 24 x 1 hex conical head
AA-4822 Thrust Spring (Coupling Shaft)
AA-4804-B housing (Coupling Shaft)
I know this is a long I want list. If anyone has or knows where I might get these parts please let me know.