Connecting parts from Coupling shaft to Transmission

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Pgreg
Posts: 3
Joined: April 1st, 2016, 7:36 pm
Body Type: AA
Model Year: 1930
Location: Kennebunk Maine

Connecting parts from Coupling shaft to Transmission

Post by Pgreg »

I am in the process of restoring a 1930 AA truck Dump truck that has a 131" Frame.
I found from the FMATC Magazine that I am missing a few parts.
The short coupling shaft I have, but no housing or, only about 10% of housing.
Looking at the pictures in the magazine it looks as though I need a list of parts.
They are:
AA-4810-B Front Support(Coupling shaft housing)
AA-4811 Male Gear (Coupling shaft)
AA-7095 Retainer (Male Gear) about 1.35" Dia.
AA-4826 Locating Screw 3/8 x 24 x 1 hex conical head
AA-4822 Thrust Spring (Coupling Shaft)
AA-4804-B housing (Coupling Shaft)
I know this is a long I want list. If anyone has or knows where I might get these parts please let me know.
User avatar
Neil Wilson
Posts: 3062
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Re: Connecting parts from Coupling shaft to Transmission

Post by Neil Wilson »

Pgreg,
Some parts you need @ https://www.ebay.com/itm/203672854044?s ... 1438.l2649

Keep you eye on Ebay.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
rustya1928
Posts: 179
Joined: April 13th, 2016, 8:26 am
Body Type: 89
Model Year: 1928

Re: Connecting parts from Coupling shaft to Transmission

Post by rustya1928 »

Hi:
I have a coupling shaft housing, and I believe the spring. I have a couple of the gears for the end of the trans, they do show some wear. Email me at rustya1931@hotmail and I will send you photos and pricing.
Charlie
Post Reply