Hi,
I am working on my floor boards in a 1931 AA with a 4-speed and I found a reference for for 2@ "turn button rivet holes."
Can someone please tell me what they are?
Thanks,
Dave
1931 AA Floor Board Question
- stew
- Posts: 72
- Joined: June 2nd, 2012, 4:46 am
- Body Type: dump
- Model Year: 1931
- Location: Lake Mills, Wisconsin
Re: 1931 AA Floor Board Question
Dave,
Doing a quick ‘search’ on this site will answer your questions, plus show you the Ford dimensions for the floorboards.
Click on the ‘magnifying glass ‘ icon.
In the keyword search bar, put in. Floorboard
In the ‘author’ search bar, put Neil Wilson
When you see the post that is titled,
‘Brake Pedal Hits Floorboard’
Click on it to continue reading the thread.
You will see the drawings and dimensions when you scroll down.
The turn buttons are the small flat pieces of steel that hold the shift cover plate in place around the shifter. There are two turn buttons on the lower floorboard and one on the upper.
Doing a quick ‘search’ on this site will answer your questions, plus show you the Ford dimensions for the floorboards.
Click on the ‘magnifying glass ‘ icon.
In the keyword search bar, put in. Floorboard
In the ‘author’ search bar, put Neil Wilson
When you see the post that is titled,
‘Brake Pedal Hits Floorboard’
Click on it to continue reading the thread.
You will see the drawings and dimensions when you scroll down.
The turn buttons are the small flat pieces of steel that hold the shift cover plate in place around the shifter. There are two turn buttons on the lower floorboard and one on the upper.
Always one bad decision away from a good time.