Looking for the following AA parts

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
User avatar
mikeg
Site Admin
Posts: 171
Joined: January 15th, 2003, 4:08 pm
Body Type: 150B
Model Year: 1930
Location: San Juan Islands, Washington
Contact:

Looking for the following AA parts

Post by mikeg » January 15th, 2003, 7:43 pm

I'm looking for the rear axle bumper pads AA-5783 and the speedo driven gear AA-17271-H, this gear has 13 teeth and a square cable hole.

I'm also looking for the late 31 indented firewall fuel shutoff valve, and associated fuel line and carb mounted filter.

User avatar
mikeg
Site Admin
Posts: 171
Joined: January 15th, 2003, 4:08 pm
Body Type: 150B
Model Year: 1930
Location: San Juan Islands, Washington
Contact:

Re: Looking for the following AA parts

Post by mikeg » February 14th, 2003, 10:08 am

mikeg wrote:I'm looking for the rear axle bumper pads AA-5783 and the speedo driven gear AA-17271-H, this gear has 13 teeth and a square cable hole.
I found the speedo gear from the "Tired Truck Resotrations" guy, $50 plus $4 shipping.
mikeg wrote:I'm also looking for the late 31 indented firewall fuel shutoff valve, and associated fuel line and carb mounted filter.
I have the shutoff valve and the line, still looking for the carb mounted filter.

Bradshaw
Posts: 88
Joined: January 16th, 2003, 2:45 pm
Model Year: 1930

Speedo Driven Gear

Post by Bradshaw » February 15th, 2003, 10:11 am

Mike,

Did you try Keith Ernst, 25 Springhouse Lane, Orwigsburg, PA 17961??

I beleive that he is making repros driven gears or had several made. That's where I got one for my AA. $50.00 plus shipping. Total to Virginia was $54.00.

trdtruck@pottsville.infi.net is his e-mail.

Good Luck,
Bradshaw

User avatar
Neil Wilson
Posts: 2891
Joined: February 5th, 2003, 9:42 pm
Body Type: 82-A/89-A
Model Year: 1930
Location: Boulder, CO
Contact:

Post by Neil Wilson » February 15th, 2003, 8:36 pm

I think that Tom Godish in Portland has the rear axle bumpers. Tom should be at "Model A Ford Works" 503-284-1928
Regards, Neil Wilson
______________________________________
neil@aafords.com - use this email for contact
https://aafords.com/ - Ford Model AA Truck Club @ aafords.com

amuffler
Posts: 6
Joined: July 24th, 2004, 10:00 pm
Model Year: 1930
Location: La Honda, CA
Contact:

Re: Looking for the following AA parts

Post by amuffler » August 28th, 2004, 9:23 pm

mikeg wrote:I'm looking for the rear axle bumper pads AA-5783 and the speedo driven gear AA-17271-H, this gear has 13 teeth and a square cable hole.

I'm also looking for the late 31 indented firewall fuel shutoff valve, and associated fuel line and carb mounted filter.
I have a nice original fuel shut off if you still need it. jdavis@amuffler.com

Post Reply