Oil capacity for a Warford Transmission
-
- Posts: 180
- Joined: April 13th, 2016, 8:26 am
- Body Type: 89
- Model Year: 1928
Oil capacity for a Warford Transmission
Does anyone know just how much oil you should put into a Warford? There is a small plug on the side of the case, should this be removed and oil filled to this level? Any help would be great. Thanks Charlie
-
- Posts: 260
- Joined: August 17th, 2019, 1:52 pm
- Body Type: Chassis
- Model Year: 1930
- Location: WV
Re: Oil capacity for a Warford Transmission
I would be willing to bet that’s your answer. Mine has a drain plug on bottom and plug above halfway on side and another on shift tower.
I would assume the side plug is your oil level top off point. That would correspond to the one on side of4 speed in similar location.
Is the one on shift tower to make adding oil easier?
I would assume the side plug is your oil level top off point. That would correspond to the one on side of4 speed in similar location.
Is the one on shift tower to make adding oil easier?
- 1crosscut
- Posts: 877
- Joined: December 25th, 2010, 7:22 pm
- Body Type: 82-A
- Model Year: 1929
- Location: Lincoln, NE
Re: Oil capacity for a Warford Transmission
I believe mine takes right at 2 quarts. The side plug is for checking the level. I keep mine an inch ish below the opening.
------------
Dave
Dave