Hi, all, I bought a new water pump for my 1930 AA. The fan did not want to go on. I fiddled with it a bit and took it to a guy I know who used a press. The fan is now stuck on the pump shaft and it is not on there far enough to put the cotter pin through the castle nut.
The only thing I can figure is there must be some sort of difference in pump shaft diameters?
Water puumps
- 1crosscut
- Posts: 880
- Joined: December 25th, 2010, 7:22 pm
- Body Type: 82-A
- Model Year: 1929
- Location: Lincoln, NE
Re: Water puumps
You can remove the castle nut and sand a bit off of the bottom of the nut in order to get the hole to line up.
------------
Dave
Dave
Re: Water puumps
I'll give it a go.
- Neil Wilson
- Posts: 3070
- Joined: February 5th, 2003, 9:42 pm
- Body Type: 82-A/89-A
- Model Year: 1930
- Location: Boulder, CO
- Contact:
Re: Water puumps
A picture of the fan you're trying to install would be of interest.
Regards, Neil Wilson
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
______________________________________
aafords.com@gmail.com - use this email for contact
https://aafords.com/
Re: Water puumps
It is on! It took some sanding but I got it to go on there.
Thanks!!!
Thanks!!!