driveshaft, wormshaft splines

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
pietr_
Posts: 3
Joined: August 16th, 2023, 3:56 am
Body Type: 82A cab
Model Year: 1928

driveshaft, wormshaft splines

Post by pietr_ »

Dear AA-ers,
I'm from over seas, The Netherlands so excuse for any bad English..
Have a question about worn splines on my shafts (drive shaft, wormshaft and coupling ) which I like to repair.
I have a late 28 early 29 truck in restoration. The shafts are 38mm 1,496 inch round and have 10 splines/ grooves round.
Is there a technical drawing from the type of splines used on this shaft and where to find it? I need this for finding the right cutter.
Advise or tips on this item appreciated.
Pietr
L1011585.JPG
L1011584.JPG
L1011571.JPG
L1011568.JPG
L1011567.JPG
User avatar
emf
Posts: 117
Joined: March 21st, 2016, 5:21 am
Body Type: Firetruck
Model Year: 1928
Location: Hudson, NY

Re: driveshaft, wormshaft splines

Post by emf »

email sent...
User avatar
elfox
Posts: 167
Joined: January 27th, 2011, 8:56 pm
Body Type: 88-A
Model Year: 1929
Location: Port Orchard, WA

Re: driveshaft, wormshaft splines

Post by elfox »

I also have the same issue with a set that I want to swap out in my '29. Is there a drawing for this, or can someone recommend a business/person that knows how to repair a badly worn spline?
Dave
Port Orchard, WA
Post Reply