Clutch Pressure Plate Faillure

AA Ford Discussion Group relating to the repair and restoration of your AA Ford.
Post Reply
Jim505
Posts: 14
Joined: April 5th, 2008, 8:32 am
Model Year: 1930

Clutch Pressure Plate Faillure

Post by Jim505 » April 15th, 2008, 1:50 pm

I was just putting on a pressure plate and as I got it aligned about half of one of the heavy springs fell out. Kinda of ruined my day. Has anybody got any experience as to why one of these springs breaks. Do I need to do something to prevent it happening again??

Stakebed
Posts: 1170
Joined: June 14th, 2007, 7:29 pm
Body Type: Grainbox
Model Year: 1929
Location: Illinois

Re: Clutch Pressure Plate Faillure

Post by Stakebed » April 16th, 2008, 5:47 pm

hmm odd, unless it had a defect or a chip outa it or somehting...who knows what could have hit it/rusted it/been weak from the start after 80 years...

User avatar
Chris Haynes
Posts: 1973
Joined: September 7th, 2003, 5:18 pm
Body Type: 82A
Model Year: 1930
Location: North Hills, CA/ Pine Grove, CA

Re: Clutch Pressure Plate Faillure

Post by Chris Haynes » April 16th, 2008, 5:59 pm

I have a NOS clutch plate and pressure plate if anyone is interested. Not rebuilt, New Old Stock still in the Ford boxes.

vonheine
Posts: 33
Joined: September 30th, 2009, 8:02 pm
Body Type: dumptruck
Model Year: 1930
Location: Massachusetts

Re: Clutch Pressure Plate Faillure

Post by vonheine » May 14th, 2018, 6:37 pm

Hello Chris, do you still have the AA pressure plate and clutch disk? You can text me at 781-249-4478 Joseph

Post Reply