Do any of you pro's know of a source somewhere near Wisconsin for Cadmuim Plating. I know of the few in CA. but shipping is very high these days.
Thanks
Cadmium Plating
Re: Cadmium Plating
If you come up with someone let me know, need four
20" retaining rings done, thanks Bruce
20" retaining rings done, thanks Bruce
-
mikeg
- Site Admin
- Posts: 179
- Joined: January 15th, 2003, 4:08 pm
- Body Type: 150B
- Model Year: 1930
- Location: San Juan Islands, Washington
- Contact:
Re: Cadmium Plating
Neil Wilson posted this bit of info in another topic here:
Aero Propeller, 303-469-1749 Fax 303-465-1254, 800-525-8756, 9616 Jeffco Airport Ave. Hanger 44, Broomfield, Co. 80021
Cadmium Plating (with clean parts) $3.75 per lb.; $65 minimum (17.34 lbs.) + $15.00 hazards waste; Small Part cleaning - $45.00 per hour – glass bead blast – as of 6/8/05
Uses cyanide bath
Aero Propeller, 303-469-1749 Fax 303-465-1254, 800-525-8756, 9616 Jeffco Airport Ave. Hanger 44, Broomfield, Co. 80021
Cadmium Plating (with clean parts) $3.75 per lb.; $65 minimum (17.34 lbs.) + $15.00 hazards waste; Small Part cleaning - $45.00 per hour – glass bead blast – as of 6/8/05
Uses cyanide bath